In this blog post, we will look at how to Install Latest GNS3 on Ubuntu 22.04|20.04|18.04. GNS3 is an open source, free Network Simulator used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 has helped in virtualization real hardware devices and preparation for certification exams such as the Cisco CCNA, CCNP, CCIE, Juniper certifications e.t.c.
GNS3 started with the emulation of Cisco devices using software called Dynamips. But it has now evolved to support many devices from multiple network vendors including Cisco virtual switches, Cisco ASAs, Brocade vRouters, Cumulus Linux switches, Docker instances, HPE VSRs, multiple Linux appliances and many others. With GNS3, you can test interoperability between many vendors and even try out esoteric setups using network technologies with SDN, NFV, Linux, and Docker.
GNS3 consists of two software components:
- The GNS3-all-in-one software (GUI)
- The GNS3 virtual machine (VM)
Features of GNS3
Below are some good features of GNS3 Network Emulation software
- Fully free and Open Source – No monthly or yearly license fees
- There is no limit on the number of devices supported – CPU and RAM hardware is your only limitation
- GNS3 supports all VIRL images (IOSv, IOSvL2, IOS-XRv, CSR1000v, NX-OSv, ASAv)
- GNS3 can run with or without hypervisors in multi-vendor environments
- It has support for multiple switching options (ESW16 Etherswitch, IOU/IOL Layer 2 images, VIRL IOSvL2)
- GNS3 supports both free and paid hypervisors – Virtualbox, VMware Workstation, VMware Player, ESXi, Fusion
- GNS3 has native support for Linux without the need for need for additional virtualization software
Install GNS3 Network Simulator on Ubuntu 22.04|20.04|18.04
There are two ways to Install the latest release of GNS3 on Ubuntu 22.04|20.04|18.04
- Install from apt repository
- Installing from source
This guide will concentrate on the installation of GNS3 on Ubuntu 22.04|20.04|18.04 from apt repository. This is recommended method since it is easy to update GNS3 packages to the latest release.
Install GNS3 on Ubuntu 22.04|20.04|18.04 from apt repository
GNS3 packages are available on a GNS3
ppa repository, first, add the repository by running the commands below:
sudo apt-get update sudo apt-get upgrade sudo add-apt-repository ppa:gns3/ppa
Update system package list and install GNS3:
sudo apt-get update sudo apt-get install gns3-server gns3-gui
This may take a bit of time depending on your internet speed. There will be an installation of a lot of packages and GNS3 dependencies.
When prompted to allow non-root user to run Wireshark and GNS3, answer yes:
vpcs which is a Virtual PC Simulator will also be installed. It allows you to simulate a PC supporting DHCP and ping when simulating Networks with GNS3.
GNS3 – Add Support for IOU (Optional)
If you would like to allow GNS3 support for IOS on Unix (IOU), you’ll have to enable running of x86 packages on a 64-bit system.
sudo dpkg --add-architecture i386 sudo apt-get update
Once it is enabled, install package.
sudo apt-get install gns3-iou
GNS3 – Add Support for Docker (Optional)
By default, GNS3 allows you to use Docker containers when building networking labs. But first, you need docker engine installed and running so that you can create Docker Containers. Use our official guide to Install Docker on your system:
Don’t forget to add your user to docker group:
sudo usermod -a -G docker $USER
Also, add your user to the following groups to avoid permission issues:
sudo usermod -aG ubridge libvirt kvm wireshark $USER
Launch GNS3 on Ubuntu 22.04|20.04|18.04
On your Desktop Environment Launcher, search for GNS3 to start initial configuration. On the first page, select “Run the typologies on my computer”.
On the second page, confirm local server configuration location.
The third page should display a successful installation message
If you want to add your Virtual machines, Docker containers, vpcs or Network devices images, do it in the next step. This can also be done later after the installation.
Once configured, you should have a ready GNS3 installed on your Ubuntu 22.04|20.04|18.04 server.
To be able to capture GNS3 packets for analysis, you need Wireshark. You can install it using our guide in the link below.
That’s all. Enjoy using GNS3. If you’re preparing for exams with this tool, I wish you happy learning and success in your certification exams.